The ventilation design of the membrane structure cannot be ignored. This is the basis for a better use of it. Let Sigma Group and you take a look at how to design its ventilation structure.                                                                                

Membrane structure building ventilation must first start with shape design to ensure a smooth air flow path, design cones, spires, and curved tops, and set exhaust windows here to make full use of the common chimney effects of membrane structures to achieve naturalness as much as possible. ventilation. When necessary, it can be supplemented by forced mechanical exhaust equipment, especially air-bearing membrane structure.

The focus of ventilation design is to supply outdoor air and reduce the accumulation of indoor heat.

In addition, maintaining a stable indoor temperature gradient is also very important to the choice of cooling schemes. The mixing of hot air accumulated in the upper space of the room and cold air in the lower human living space has a decisive influence on the comfort of heat preservation.

Air inlets and outlets should be arranged in different places, so that cold air can enter the room from a low place, and flow out of the outdoor from a high place, and the direction of airflow is the same as the natural flow of indoor air.

Different membrane materials, substrates and coating materials have different thicknesses, and their permeability to air, water vapor, etc., are quite different. They should be determined by consulting the supplier.