For outdoor landscape membrane structure buildings, although membrane structure materials have certain self-cleaning properties, over time, the accumulation of dirt will inevitably affect its appearance. For this, we need to perform the relevant cleaning operations. So what details should be paid attention to in the cleaning process of the landscape membrane structure? Let's read the following content with SIGMA GROUP, I hope it can be helpful to everyone.                                     

1、Use the cleaning agent recommended by the landscape film structure manufacturer together with a soft brush, sponge and related cleaning equipment to clean the surface of the film, and then rinse off the dust and cleaning agent with clean water.

2、The surface of the landscape film structure should not be covered for a long time, such as iron, chemicals and other colorants.

3、When using the cleaning solution on the landscape membrane structure, it is enough for a few minutes, but avoid air-drying.

4、Larger dust particles should be cleaned with water.

5、When cleaning the surface of the landscape membrane structure, it is not appropriate to use acidic or alkaline substances, such as gasoline, alcohol, chlorinated water, etc.

6、The antifouling agent may require a high concentration of cleaning agent, but be careful not to damage the surface of the membrane structure.

7、The cleaning agent should not be in direct contact with the surface through the hard bottom, so as to prevent sand grinding the surface and seriously damage the surface of the membrane.