The stand membrane structure is a new application field of membrane structure materials in recent years. The stand membrane structure can cover the entire venue well. The tension of the membrane structure increases the spatial span of the building, reduces the overall weight of the building, and makes the structure simple and safe.

Usually, the stand membrane structure should be inspected in one or more batches according to the specific situation, and the acceptance quality should be accepted according to the regulations. So what are the key points that should be paid attention to in the acceptance of the stand membrane structure? let SIGMA GROUP explain it, I hope it can be helpful to everyone.                                                                                                                                               

1. The connector must have sufficient rigidity, strength and durability. Connectors must not be damaged prior to connecting membrane structures, cables or steel members, and must not cause deformations that affect structural performance.

2. The structure of the nodes must conform to the calculation assumptions. The influence of the eccentricity of the node structure on the cable-membrane material, the type of preload, the tolerance of the structure installation and the possibility of secondary expansion need to be considered.

3. The connection of the stand membrane structure must maintain a high degree of water tightness, and certain design measures must be taken to prevent the wear of the membrane material.

4. In order to reduce the stress concentration at the joint, the connector must transmit force reliably.

5. There should be no sharp corners, burrs or sharp points at the connection between the support part and the stand membrane structure.

6. For metal connectors, appropriate anti-corrosion measures must be taken.

7. Ensure that the stand membrane structure connection is safe, beautiful and reasonable.